ITEM | ML -60A |
Capacity | Swing over bed | Ø 720 (Ø 28.35) |
Max. machining diameter × length | STD: Ø 550 × 1100 (Ø 21.6 × 43.3) |
Max. distance between centers | 1270 (50) |
Bed | Bed slant angle | 45° |
Max. travel range of Z/X-axis | 1100 / 385 (43.3 / 15.15) ; |
Rapid traverse speed of Z/X-axis | 20 / 12 m /min (787 / 472 ipm) |
Servo motor of Z/X-axis | 2.9 / 2.1 kW |
Spindle | Diameter of spindle front bearing bore | STD: Ø 150 (Ø 5.9) ; OPT: Ø 180 (Ø 7.1) |
Diameter of spindle through bore/bar | STD: Ø131 / Ø116 (Ø 5.2/ Ø 4.6)
OPT: Ø102 / Ø90 (Ø4 / Ø3.5) ; |
Spindle nose | STD: ASA A2-8; OPT: ASA A2-11 |
Taper of spindle bore | 1/20 |
Spindle drive motor | STD: 22/26 kW; OPT: 30/37 kW |
Spindle speed | 40-2000 rpm (4-speed gear) |
Diameter of chuck | STD: 15” ; OPT: 12” |
Hydraulic Tailstock | Quill diameter | Ø 125 (Ø 4.92) |
Tail stock travel | 1080 (42.52) |
Quill | STD:Fixed; OP T: Rotating quill |
Quill taper | STD: MT No.5; OPT: MT No.4 |
Quill travel | 160 (6.3) |
Tool Turret | Type | Vertical | VDI | Power |
Tool | STD:8 | OPT:12 | STD:8 | OPT:12 | STD:8 | OPT:12 |
Boring bar holder | 4 | 6 | 4 | 6 | 2 | 3 |
External tool holder | -- | -- | 2 | 4 | 2 | 4 |
Internal tool holder | 4 | 6 | 2 | 2 | 1 | 2 |
Radial power tool (PRR) | -- | -- | -- | -- | 1 | 1 |
Axial power tool (PRR) | -- | -- | -- | -- | 2 | 2 |
Tool shank | ϒ 32 × 32 ( ϒ 1.26 × 1.26) |
Drive Motor | Coolant motor | 960 W |
Hydraulic system motor | 2.25 W |
Chip conveyor motor | 1/4 HP |
Miscellaneous | Height from floor to spindle center | 1300 (51.2) |
Height from bed to spindle center | 455 (17.9) |
Floor area (W× D) | 4607 × 2126 (183.8 × 83.7) |
Packing size (W × D × H) | 5060 × 2400 × 3120 (199 × 94 × 123) |
Net weight | 11080 kg (24376 lbs) |
Gross weight | 12900 kg (28380 lbs) |
点击图片查看原图
